Re: Disabling the Low Pass Audio Filter on A500/2000s

Article View: comp.sys.amiga.tech

Article #12965

Back to comp.sys.amiga.tech Previous Next

#12965

From: King Claudius
Date: Sun, 11 Jun 1989 21:00

11 lines
1044 bytes

In article <5213@charon.unm.edu> csbrkaau@ariel.unm.edu (Jim Banas) writes:
>turn the LED power light on and off (turns the filter on and off)

I don't think that the power light's level has anything to do with the low
pass filter, I think the program (LED) does that so you can tell if it's active
or not.

Listen closely to the sound output; and if you hear a change in the quality,
the program has been disabled.  Otherwise, you have nothing to worry about.
-- 
cknight@polyslo.calpoly.edu                                  ---King Claudius---

Technical Details

Message-ID: <11923@polyslo.CalPoly.EDU>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!bloom-beacon!usc!polyslo!cknight

References: <5213@charon.unm.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!rutgers!apple!bloom-beacon!usc!polyslo!cknight
From: cknight@polyslo.CalPoly.EDU (King Claudius)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Re: Disabling the Low Pass Audio Filter on A500/2000s
Message-ID: <11923@polyslo.CalPoly.EDU>
Date: 11 Jun 89 21:00:35 GMT
References: <5213@charon.unm.edu>
Reply-To: cknight@polyslo.CalPoly.EDU (King Claudius)
Organization: Cal Poly State University -- San Luis Obispo
Lines: 11

Reply to Parent Message