Re: Parallel-Port network preliminary specs & demonstration code

Article View: comp.sys.amiga.tech

Article #1301

Back to comp.sys.amiga.tech Previous Next

#1301

From: Matt Dillon
Date: Sat, 16 Sep 1989 01:34

19 lines
1037 bytes

	The assembly I distributed as Alpha *Does* have a few bugs in it.

    I have fixed this, just need to send it to the moderator now.

				-Matt

:Matt, if you're listening, how do the channels work?  If I do a ParAddress(1),
:then write, why do I need to send a '1' as the first parameter (which is what
:parman does?)

	Each host has an address.  When you send a packet only the
    receiving host is allowed to receive it.  The sender aquires the
    line and the receiver sees it is being addressed and fullfills the
    other half of the protocol.

	I will send all this stuff to the moderator....

				-Matt

Technical Details

Message-ID: <8909160134.AA05207@postgres.Berkeley.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!POSTGRES.BERKELEY.EDU!dillon

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!ucbvax!POSTGRES.BERKELEY.EDU!dillon
From: dillon@POSTGRES.BERKELEY.EDU (Matt Dillon)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Parallel-Port network preliminary specs & demonstration code
Message-ID: <8909160134.AA05207@postgres.Berkeley.EDU>
Date: 16 Sep 89 01:34:18 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 19