Re: A2620 / Microbotics hard card probl

Article View: comp.sys.amiga.tech

Article #13124

Back to comp.sys.amiga.tech Previous Next

#13124

From: bty00298
Date: Sat, 16 Dec 1989 10:38

16 lines
1106 bytes

It could be the revision of your motherboard that could be the culprit.
Upon installing the A2630 in my rev. 4.1 motherboard I experienced the same
failure.  I had been advised by someone at Commodore that I would need to
upgrade my motherboard to 4.5 and that this should only involve the cost of
labor with the purchase of the card.

I do not represent Commodore in any way and do not guarantee that my info
is correct beyond my current condition.


Brian Yamanaka
University of Illinois at Urbana-Champaign
bty00298@uxa.cso.uiuc.edu

Only one more semester!!!			Happy Holidays!!

Technical Details

Message-ID: <230500011@uxa.cso.uiuc.edu>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!bty00298

References: <768@abekrd.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!wuarchive!brutus.cs.uiuc.edu!ux1.cso.uiuc.edu!ux1.cso.uiuc.edu!uxa.cso.uiuc.edu!bty00298
From: bty00298@uxa.cso.uiuc.edu
Newsgroups: comp.sys.amiga.tech
Subject: Re: A2620 / Microbotics hard card probl
Message-ID: <230500011@uxa.cso.uiuc.edu>
Date: 16 Dec 89 10:38:54 GMT
References: <768@abekrd.UUCP>
Lines: 16
Nf-ID: #R:abekrd.UUCP:768:uxa.cso.uiuc.edu:230500011:000:583
Nf-From: uxa.cso.uiuc.edu!bty00298    Dec 15 21:36:00 1989

Reply to Parent Message