Article View: comp.sys.amiga.tech
Article #13164Re: A2620 / Microbotics hard card probl
From: Rick Unland - Regional Support
Date: Tue, 19 Dec 1989 21:41
Date: Tue, 19 Dec 1989 21:41
19 lines
1470 bytes
1470 bytes
As to the revision problem I think it a good idea to have your machine brought up to the 4.5 rev but I think that you might want to check the rev numbers of the roms on the 2620. If you do not have the latest then that might be the the thing to look into. The latest roms can be purchased from your dealer through the parts department. This was the soulution I used when having the same difficulty on my machine and found that it worked fine after the new revs were installed. Hope this helps out. Rick -- ******* Rick Unland Commodore Business Machines **************************** * Usenet: uunet!cbmvax!unland ARPA: cbmvax!unland!@uunet.UU.NET * * These opinions are my Own! Not my employers, unless so stated! * * "I thought they said the Commodore could stand up to anything!" * *********************************************** Earth Girls Are Easy! **********
Technical Details
Message-ID:
<9105@cbmvax.commodore.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!caesar.cs.montana.edu!brutus.cs.uiuc.edu!apple!oliveb!amiga!cbmvax!unlandReferences:
<768@abekrd.UUCP> <230500011@uxa.cso.uiuc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!samsung!caesar.cs.montana.edu!brutus.cs.uiuc.edu!apple!oliveb!amiga!cbmvax!unland From: unland@cbmvax.commodore.com (Rick Unland - Regional Support) Newsgroups: comp.sys.amiga.tech Subject: Re: A2620 / Microbotics hard card probl Message-ID: <9105@cbmvax.commodore.com> Date: 19 Dec 89 21:41:29 GMT References: <768@abekrd.UUCP> <230500011@uxa.cso.uiuc.edu> Reply-To: unland@cbmvax.commodore.com (Rick Unland - Regional Support) Organization: Commodore, West Chester, PA Lines: 19