Need auto-config specs.

Article View: comp.sys.amiga.tech

Article #13226

Back to comp.sys.amiga.tech Previous Next

#13226

From: Mike R. Kraml
Date: Fri, 29 Dec 1989 18:54

10 lines
980 bytes

Hello all:
Does anyone know where I can get the specs for designing an autoconfiguring 
card on the amiga 2000 buss?  I have a very simple d/a converter circuit I 
would like to put on a card and have it autoconfig, but don't know where to 
start.  Any help would be great!!! Thanks, Mike...

 =============================================================================
  Mike Kraml - Manager-Separations MECHANIZATION - SWBT - ( The Techies)
  UUCP: {uunet, bellcore, texbell}...!swbatl!slims!ammrk   
 =============================================================================

Technical Details

Message-ID: <1085@swbatl.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!wuarchive!swbatl!ammrk

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!wuarchive!swbatl!ammrk
From: ammrk@swbatl.UUCP (Mike R. Kraml)
Newsgroups: comp.sys.amiga.tech
Subject: Need auto-config specs.
Keywords: auto-config buss hardware help
Message-ID: <1085@swbatl.UUCP>
Date: 29 Dec 89 18:54:09 GMT
Organization: Southwestern Bell Tele. Co. - Advanced Technology Lab - St. Louis
Lines: 10