HELP! Panasonic Multisync <> 2000

Article View: comp.sys.amiga.tech

Article #13414

Back to comp.sys.amiga.tech Previous Next

#13414

From: PAUL E. GANTER
Date: Thu, 11 Jan 1990 02:01

19 lines
1297 bytes

HELP  HELP HELP  HELP  HELP  HELP  HELP

I just got a Panasonic C1391 Multisync monitor for my Amiga 2000.
I ground down my 25 pin DSUB, threw together a cable, and no video.
I switched the connections around (the Panasonic manual is rather
unclear about pin numbering)--still no video.  I used my old 1084
monitor cable, plugged it into a DIN connector, and attached that
via a breadboard to the video in of the monitor.  After trying
various combinations--no video.  I finally connected the blue signal
of the 2000 to the blue in of the monitor, the composite sync of the
2000 to the composite sync of the monitor.  The blue pin is the same
whether the Pansonic manual is right or not--I tried both possible
sync pins.  No video.  I tried the monitor on an EGA card--it works.

Does anyone have any suggestions?  I have no idea what to try next.

Please E-mail if possible!

Paul

Technical Details

Message-ID: <77005@psuecl.bitnet>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!psuvax1!psuvm!psuecl!peg

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!psuvax1!psuvm!psuecl!peg
From: peg@psuecl.bitnet (PAUL E. GANTER)
Newsgroups: comp.sys.amiga.tech
Subject: HELP!  Panasonic Multisync <> 2000
Message-ID: <77005@psuecl.bitnet>
Date: 11 Jan 90 02:01:36 GMT
Organization: Engineering Computer Lab, Pennsylvania State University
Lines: 18