Article View: comp.sys.amiga.tech
Article #13427Re: speeding up the amiga and hardware hacking
From: Dave Haynie
Date: Thu, 11 Jan 1990 22:44
Date: Thu, 11 Jan 1990 22:44
42 lines
2738 bytes
2738 bytes
in article <140.filbo@gorn.santa-cruz.ca.us>, filbo@gorn.santa-cruz.ca.us (Bela Lubkin) says:
> X-Claimer: I >am< R Pentomino!
> In article <697@tau.sm.luth.se> Karl-Gunnar Hultland writes:
>>contact and a switch to XCLK enable and thus get a FASTER amiga.
>>If this works it would give faster custom chips too, and I'd like
>>that very much.
> I've asked about this before (not here) and never gotten a good answer.
> I'd like to hear from the real hardware gurus on this.
You can go a little bit faster. In order to work nicely with Genlock
devices, any Amiga will let you run a clock roughly 5% faster than the
basic 28.636MHz (NTSC) clock. Genlocks use the XCLK and /XCLKEN lines
and may have some clock slop, but typically not much -- the color clock
is very frequency sensitive in video, so if you see color, you are
pretty close to dead on, frequency wise. In any case, while there is
some slop, this isn't intended to be a general way to boost your system
speed. Anything beyond 5% and you're just plain lucky if it works. And
of course, if you have some need for color composite video, just about
any noticable speedup here will kill your color, though the monitors
typically handle the slightly faster dot clock.
The other thing to be careful about is the clock quality. The system
expects a nice TTL compatible clock applied to XCLK. If you feed it
a noisy, analog, or unbalenced (duty-cycle-wise) signal, you have a good
chance of creating a flakey system. Some 68020 and 68030 boards may be
more sensitive to this clock speed and quality than the main 68000
motherboard, since most use a 14MHz clock of some kind.
> There's enough chance of damaging hardware to say: BE CAREFUL!
I'd certainly agree with that, as with any hardware hack. Know what
you're doing!
> Bela Lubkin * * // filbo@gorn.santa-cruz.ca.us CI$: 73047,1112 (slow)
> @ * * // belal@sco.com ..ucbvax!ucscc!{gorn!filbo,sco!belal}
> R Pentomino * \X/ Filbo @ Pyrzqxgl +408-476-4633 and XBBS +408-476-4945
--
Dave Haynie Commodore-Amiga (Systems Engineering) "The Crew That Never Rests"
{uunet|pyramid|rutgers}!cbmvax!daveh PLINK: hazy BIX: hazy
Too much of everything is just enough
Technical Details
Message-ID:
<9303@cbmvax.commodore.com>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!apple!oliveb!amiga!cbmvax!davehReferences:
<140.filbo@gorn.santa-cruz.ca.us>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!apple!oliveb!amiga!cbmvax!daveh From: daveh@cbmvax.commodore.com (Dave Haynie) Newsgroups: comp.sys.amiga.tech Subject: Re: speeding up the amiga and hardware hacking Message-ID: <9303@cbmvax.commodore.com> Date: 11 Jan 90 22:44:03 GMT References: <140.filbo@gorn.santa-cruz.ca.us> Organization: Commodore, West Chester, PA Lines: 42