Re:CreateProc

Article View: comp.sys.amiga.tech

Article #13782

Back to comp.sys.amiga.tech Previous Next

#13782

From: Jim Locker
Date: Mon, 19 Feb 1990 03:03

26 lines
1525 bytes

The process that was created with CreateProc() must tell the parent process 
when it exits.  In the Workbench environment, this is accomplished by 
ReplyMsg() the Workbench startup message, and is handled automatically in c.o, 
the Lattice start up code.  If you CreateProc() a program, you will find it 
simplest to just emulate Workbench; send a Workbench Startup message tailored 
in any fashion you consider appropriate and then shut the process down when 
that message is replied.

Other than CreateProc()?  There is Execute() which assumes a CLI type 
environment.  You might also try the ARP ASynchRun() command (which I have 
been unable to find, so I have not tried it)...

Jim Locker


--  
-------------------------------------------------
Jim Locker - via FidoNet node 1:110/300
UUCP: uunet!dayvb!afitamy!Jim.Locker
ARPA: Jim.Locker@afitamy.fidonet.org
-------------------------------------------------|
>>>> The // Air Force Institute of Technology    |
>       //     Amiga Users BBS/UFGateway         |
>    \ //    Dayton, Ohio  (513)-252-7681        |     
>     X/               1:110/300                 |
-------------------------------------------------|

Technical Details

Message-ID: <108.25DFE966@afitamy.fidonet.org>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!dayvb!afitamy!Jim.Locker

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!dayvb!afitamy!Jim.Locker
From: Jim.Locker@afitamy.fidonet.org (Jim Locker)
Newsgroups: comp.sys.amiga.tech
Subject: Re:CreateProc
Message-ID: <108.25DFE966@afitamy.fidonet.org>
Date: 19 Feb 90 03:03:33 GMT
Organization: AFIT Amiga Users BBS(AFITAUG), Dayton, Oh. (513) 252-7681
Lines: 26