Re: reboot a PAL machine into NTSC

Article View: comp.sys.amiga.tech

Article #13803

Back to comp.sys.amiga.tech Previous Next

#13803

From: Fred Hamilton
Date: Tue, 20 Feb 1990 08:23

15 lines
1193 bytes

In article <1990Feb20.013713.12554@agate.berkeley.edu>, johnf@sag4.ssl.berkeley.edu (John Flanagan) writes:
> 
> Well, just for completeness, I have NewZapped Udi's NTSCBoot to create
> PALBoot, which reboots North American Amigas into PAL mode.  The American
> 1084 monitor can handle PAL just fine, apparently, since I'm using it that
> way right now.  This also works fine on LUCAS/FRANCES with the 32-bit
> Kickstart, as I can attest.

So what magic are you using to put the 1 meg Agnus in your LUCAS/FRANCES based
1000 (or is it a 500)?

-- 
Fred Hamilton                  Any views, comments, or ideas expressed here
Harris Semiconductor           are entirely my own.  Even good ones.
Santa Clara, CA

Technical Details

Message-ID: <82.25e0fe73@intersil.uucp>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!daver!intersil!hamilton

References: <9002181052.AA03247@virgo.tau.ac.il> <1990Feb20.013713.12554@agate.berkeley.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!mips!daver!intersil!hamilton
From: hamilton@intersil.uucp (Fred Hamilton)
Newsgroups: comp.sys.amiga.tech
Subject: Re: reboot a PAL machine into NTSC
Message-ID: <82.25e0fe73@intersil.uucp>
Date: 20 Feb 90 08:23:15 GMT
References: <9002181052.AA03247@virgo.tau.ac.il> <1990Feb20.013713.12554@agate.berkeley.edu>
Organization: Harris Semiconductor, Santa Clara CA
Lines: 15

Reply to Parent Message