Using Lattice C with ARP V1.3

Article View: comp.sys.amiga.tech

Article #13806

Back to comp.sys.amiga.tech Previous Next

#13806

From: Steve Snodgrass
Date: Wed, 14 Feb 1990 02:32

12 lines
1137 bytes

Does anyone know what is going on with ARP V1.3 and Lattice?  The programmer's
distributions contain a bare minimum of support files for Lattice, and no
convenient prepackaged startup module that opens ARP library, i.e. you have
to call OpenLibrary().  Hell, I even had to assemble the glue routines that
they give you.  I would greatly appreciate any info, especially on how/where to
obtain that "canned" startup code. 

 +-----------------------------------------------------------------------+
 | Reality: Steve Snodgrass <*> Cyberspace: GRX1042 @ UofT02.UToledo.Edu |
 | /\/ "No his mind is not for rent, to any god or government" -Rush \/\ |
 | "Mu is the sound a Greek cat makes."  -Dr. R.G. Bohn, Univ. of Toledo |
 `-----------------------------------------------------------------------'

Technical Details

Message-ID: <562.25d87cd2@uoft02.utoledo.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!tut.cis.ohio-state.edu!uoft02!grx1042

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!cs.utexas.edu!tut.cis.ohio-state.edu!uoft02!grx1042
From: grx1042@uoft02.utoledo.edu (Steve Snodgrass)
Newsgroups: comp.sys.amiga.tech
Subject: Using Lattice C with ARP V1.3
Message-ID: <562.25d87cd2@uoft02.utoledo.edu>
Date: 14 Feb 90 02:32:02 GMT
Lines: 12