Prep / Unit #

Article View: comp.sys.amiga.tech

Article #1767

Back to comp.sys.amiga.tech Previous Next

#1767

From: Steve Costa
Date: Sat, 21 Oct 1989 19:14

12 lines
927 bytes

I've installed a SyQuest 44 Mb removable cartridge drive on my 2000,
using a 2090 controller. I have an ST251 as my primary hard drive.
The primary drawback to this setup is that 'DiskChange' doesn't work,
so I have to reboot to switch to alternate cartridges in the SyQuest.

My question:

   At some point I may install a second SyQuest drive. Will I be able
   to use a cartridge that has been prepped in the first SCSI drive
   in the second SCSI drive? In other words, when a drive is prepped,
   can it only be used in the unit in which it was prepped?

Technical Details

Message-ID: <8766@hoptoad.uucp>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!ucbvax!unisoft!hoptoad!slc

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!ucsd!ucbvax!unisoft!hoptoad!slc
From: slc@hoptoad.uucp (Steve Costa)
Newsgroups: comp.sys.amiga.tech
Subject: Prep / Unit #
Message-ID: <8766@hoptoad.uucp>
Date: 21 Oct 89 19:14:42 GMT
Reply-To: slc@hoptoad.UUCP (Steve Costa)
Distribution: usa
Organization: Presidio Software
Lines: 12