🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.amiga.tech
Article #1773

Re: Board Layout and Memory Allocation

#1773
From: Bill Seymour
Date: Tue, 24 Oct 1989 06:51
48 lines
2624 bytes
From article <119@dtg.nsc.com:, by waggoner@dtg.nsc.com (Mark Waggoner):
: QUESTION 1.
: Does anyone have experience with any printed circuit board layout
: programs for the Amiga.  I am interested in something that would
: be capable of laying out a board for the 2000 using socketed fine 
: pitch part(s).  What is fine pitch you may ask:
:    
:        |< .075 :|
:    ___ o        o        o
:    ^   |
:    .20 |
:    v   |
:    ______ o        o        o
:        |  |
:        |<:|
:        .025
:              o        o        o 
: 
: 
: Any comments on available software would be appreciated.  Feel free
: to email.

	You can handle that fairly easily with Pro-Board. You won't be able
to route trace directly between the pads at .075 spacing, but there's plenty
of room for three or four traces between the .200 spacing pads. Pro-Board
allows you to create components on a .001 grid, so it's fairly simple to
handle what you need here. Note that the major limitation I've run into is
the .012 trace width minimum. That means that no matter what you do, you won't
be able to run two traces between pads on .100 centers. You're also limited
to .055 or larger pads and .050 vias. This makes for some interesting 
topology problems when routing a complex board... :-) I've successfully
done six layer boards (the package only supports four, but I have two Amigas.)
And I supposed I could play with routing in 2X to get .006 traces... (Maybe
I'll give that a try later... I could edit the components to use .100 pads
to simulate .050. I'll let you know how it works.)

: Thanks,
:     Mark
: 
: -- 
:  ,------------------------------------------------------------------.
: |  Mark Waggoner   (408) 721-6306           waggoner@dtg.nsc.com     |
:  `------------------------------------------------------------------'
-- 
     -Bill Seymour             ...tektronix!reed!percival!agora!billsey
                               ...tektronix!sequent.UUCP!calvin!billsey
Bejed, Inc.       NES, Inc.        Northwest Amiga Group    At Home Sometimes
(503) 691-2552    (503) 246-9311   (503) 656-7393 BBS       (503) 640-0842
Technical Details
Message-ID: <1657@agora.UUCP>
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!gem.mps.ohio-state.edu!ginosko!uunet!zephyr.ens.tek.com!tektronix!percy!parsely!agora!billsey
References: <119@dtg.nsc.com:

Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uwm.edu!gem.mps.ohio-state.edu!ginosko!uunet!zephyr.ens.tek.com!tektronix!percy!parsely!agora!billsey
From: billsey@agora.UUCP (Bill Seymour)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Re: Board Layout and Memory Allocation
Message-ID: <1657@agora.UUCP>
Date: 24 Oct 89 06:51:12 GMT
References: <119@dtg.nsc.com:
Organization: Advanced Solutions, Hillsboro, OR
Lines: 48