Re: Problems with serial device in shared mode

Article View: comp.sys.amiga.tech

Article #1806

Back to comp.sys.amiga.tech Previous Next

#1806

From: Matt Dillon
Date: Tue, 24 Oct 1989 06:41

16 lines
1106 bytes

	I do this all the time (have one program hold the serial device
    open whilst I execute another).  Are you sure you are using the 
    1.3 serial.device ???

	There is a problem... many terminal programs and other programs
    do not open the serial.device SERF_SHARED !! THIS IS WRONG!  You
    programmers out there, ALWAYS OPEN SERIAL.DEVICE SERF_SHARED !!

	The other problem is that the serial.device will refuse to
    do a SDCMD_SETPARAMS call while active requests are pending, so
    if you do use something similar to what I've described above you
    have to be sure that the first program doesn't have any active
    requests when it executes the second program.

					-Matt

Technical Details

Message-ID: <8910240641.AA22293@postgres.Berkeley.EDU>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!POSTGRES.BERKELEY.EDU!dillon

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!mailrus!cs.utexas.edu!tut.cis.ohio-state.edu!ucbvax!POSTGRES.BERKELEY.EDU!dillon
From: dillon@POSTGRES.BERKELEY.EDU (Matt Dillon)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Problems with serial device in shared mode
Message-ID: <8910240641.AA22293@postgres.Berkeley.EDU>
Date: 24 Oct 89 06:41:37 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 16