Which Adaptec Controller do I need for a Maxtor 4380E ESDI Drive?

Article View: comp.sys.amiga.tech

Article #1992

Back to comp.sys.amiga.tech Previous Next

#1992

From: Rick Flower
Date: Sun, 05 Nov 1989 00:00

13 lines
1326 bytes

I'm thinking about purchasing the above mentioned drive for use on my A2000
and was wondering which Adaptec Board that I will need to convert the ESDI
drive to run under SCSI on the A2000 (via a C-A 2090 controller).. If there
are any nasty drawbacks of this setup or certain things that I might need to
know, that would be nice also!  Thanks!

+-----------------------------------------------------------------------------+
|             Caution, 68k Assembly Language Programmer at Play!              |
|              Support S.A.N.E. (Snails Against Nuclear Energy)               |
+-----------------------------------------------------------------------------+
|             UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!rickf             |
|         InterNet: rickf@pnet02.gryphon.com                                  |
+=============================================================================+

Technical Details

Message-ID: <21810@gryphon.COM>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!rickf

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!rickf
From: rickf@pnet02.gryphon.com (Rick Flower)
Newsgroups: comp.sys.amiga.tech
Subject: Which Adaptec Controller do I need for a Maxtor 4380E ESDI Drive?
Message-ID: <21810@gryphon.COM>
Date: 5 Nov 89 00:00:34 GMT
Sender: news@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 13