Re: Which Adaptec Controller ... (OMTI 7200)

Article View: comp.sys.amiga.tech

Article #2001

Back to comp.sys.amiga.tech Previous Next

#2001

From: Jim Horalek
Date: Sun, 05 Nov 1989 15:40

12 lines
1038 bytes

In article <21810@gryphon.COM> rickf@pnet02.gryphon.com (Rick Flower) writes:
>I'm thinking about purchasing the above mentioned drive for use on my A2000
>and was wondering which Adaptec Board that I will need to convert the ESDI
>drive to run under SCSI on the A2000 (via a C-A 2090 controller).. If there
>are any nasty drawbacks of this setup or certain things that I might need to
>know, that would be nice also!  Thanks!

Along the same lines I have a Fujistu 2246? EDSI drive and an OMTI 7200 
scsi2edsi controller.  I have an A2090A.  I would like to hook it all up.
Anyone tried the OMTI?

  Jim

Technical Details

Message-ID: <3516@alliant.Alliant.COM>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!spdcc!merk!alliant!horalek

References: <21810@gryphon.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!spdcc!merk!alliant!horalek
From: horalek@Alliant.COM (Jim Horalek)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Which Adaptec Controller ...  (OMTI 7200)
Message-ID: <3516@alliant.Alliant.COM>
Date: 5 Nov 89 15:40:13 GMT
References: <21810@gryphon.COM>
Reply-To: horalek@alliant.Alliant.COM (Jim Horalek)
Organization: Alliant Computer Systems, Littleton, MA
Lines: 12

Reply to Parent Message