Super Agnus Question

Article View: comp.sys.amiga.tech

Article #2151

Back to comp.sys.amiga.tech Previous Next

#2151

From: Matt A. Wood
Date: Wed, 15 Nov 1989 19:25

25 lines
1298 bytes

I ordered and received from CMO:
	1.3 ROM Chip
	Super Agnus
	A590 HD.
I put in the chips, put 1 Meg memory into the HD, closed it all up again,
and booted.  Fine.  Everything came up just fine, but I'm now showing
(using clockdj) about 500K chip ram and 1500K Fast.  Why don't I have
1 Meg Chip ram after installing the new Super Agnus?  Am I being stupid?
Was there some switch I should have switched, or some program I need
to add to startup-sequence?  There were *no* instructions with the 
Super Agnus, so I'm at a loss.

Thanks very much for your help.

Matt A. Wood.
Astronomy Dept, University of Texas, Austin TX 78712  
{allegra,ihnp4}!{ut-sally,noao}!utastro!matt	(UUCP)
matt@astro.UTEXAS.EDU.				(Internet)

BTW:  To the German Amigans, congratulations on these amazing times!
-- 
Matt A. Wood				matt@astro.as.utexas.edu
Astronomy Department			(512) 471-4419
The Univeristy of Texas 
Austin, TX  78712-1083

Technical Details

Message-ID: <20964@ut-emx.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!ut-emx!mwood

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cs.utexas.edu!ut-emx!mwood
From: mwood@ut-emx.UUCP (Matt A. Wood)
Newsgroups: comp.sys.amiga.tech
Subject: Super Agnus Question
Message-ID: <20964@ut-emx.UUCP>
Date: 15 Nov 89 19:25:04 GMT
Organization: The University of Texas at Austin, Austin, Texas
Lines: 25