Article View: comp.sys.amiga.tech
Article #2162AT Bridge can't find lib.
From: Art Mercer
Date: Tue, 14 Nov 1989 21:21
Date: Tue, 14 Nov 1989 21:21
36 lines
1701 bytes
1701 bytes
Got a couple of Bridge board question. We have three A2500's with the AT Bridge board & Janus v2 software. From time to time when attempting to bring up the PC software, we will get a "library not found" error message. The only way we've found to get the sucker working is a reboot of the Amiga. This is happening with all 3 machines. I got the gumption to post this cause I just had a student in my office with a brand new A2000 that's (mis)behaving in the same fashion. This problem has seemed to occur randomly, so we haven't been able to trace a common cause. Any clues? The second minor nasty occurs with using the Amiga PC services. We have 3Com 3C503 ethernet boards witth start PROMS on the PC side and after (re)-booting, the PC side cannot find the Amiga services. Says they're not running. If, HOWEVER, we do a DIR a: all is well! Since we have a work around for this one it's more of an inconvience than anything else, but it doesn't look good when the tinted blue bosses are around... Hopefully CATS is listening. Art Mercer Associate Director, Academic Computing Resources 040T Library Annex Wright State University Col Glenn Hwy. Dayton, OH 45435 Reply to above or BITNET: amercer@wsu.bitnet ---
Technical Details
Message-ID:
<840@thor.wright.EDU>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!ncrlnk!wright!eve!amercerShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!uunet!ncrlnk!wright!eve!amercer From: amercer@eve.wright.edu (Art Mercer) Newsgroups: comp.sys.amiga.tech Subject: AT Bridge can't find lib. Message-ID: <840@thor.wright.EDU> Date: 14 Nov 89 21:21:53 GMT Sender: news@wright.EDU Reply-To: amercer@eve.UUCP (Art Mercer) Distribution: usa Organization: Wright State University, University Computing Services Lines: 36