A2620 and DRAM timing jumper j500

Article View: comp.sys.amiga.tech

Article #2166

Back to comp.sys.amiga.tech Previous Next

#2166

From: Roger Uzun
Date: Fri, 17 Nov 1989 04:16

10 lines
804 bytes

I switched the j500 jumper on the A2620 board of my A2500 to
use 80ns DRAM timing.  I only have 90 and 100ns DRAMS on the board.
So far no problems in operation and the machine is faster.
Will I be relatively safe running the DRAMS at 80ns?  If it was
going to fail would it fail right away?
-Roger

UUCP: {hplabs!hp-sdd ucsd nosc}!crash!pnet01!uzun
ARPA: crash!pnet01!uzun@nosc.mil
INET: uzun@pnet01.cts.com

Technical Details

Message-ID: <720@crash.cts.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cica!ctrsol!sdsu!crash!pnet01!uzun

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!utstat!jarvis.csri.toronto.edu!mailrus!tut.cis.ohio-state.edu!cica!ctrsol!sdsu!crash!pnet01!uzun
From: uzun@pnet01.cts.com (Roger Uzun)
Newsgroups: comp.sys.amiga.tech
Subject: A2620 and DRAM timing jumper j500
Message-ID: <720@crash.cts.com>
Date: 17 Nov 89 04:16:02 GMT
Sender: root@crash.cts.com
Organization: People-Net [pnet01], El Cajon CA
Lines: 10