Re: Problems with Maxtor drives (merged threads)

Article View: comp.sys.amiga.tech

Article #2195

Back to comp.sys.amiga.tech Previous Next

#2195

From: Doug_B_Erdely
Date: Sat, 25 Nov 1989 04:28

9 lines
827 bytes

The termination packs are located on the pc board right near where the SCSI
cable connects. If you have more than one drive on the system, you should
take the termination packs off. If the Maxtor is the only one, then the
termination packs should be on. The last SCSI device SHOULD be the only
unit with the termination pack.

	- Doug -

Doug_B_Erdely@Cup.Portal.Com

Technical Details

Message-ID: <24455@cup.portal.com>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!samsung!cs.utexas.edu!wuarchive!usc!apple!fox!portal!cup.portal.com!Doug_B_Erdely

References: <24338@cup.portal.com> <4988@cbnewsc.ATT.COM>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!aplcen!samsung!cs.utexas.edu!wuarchive!usc!apple!fox!portal!cup.portal.com!Doug_B_Erdely
From: Doug_B_Erdely@cup.portal.com
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga
Subject: Re: Problems with Maxtor drives (merged threads)
Message-ID: <24455@cup.portal.com>
Date: 25 Nov 89 04:28:40 GMT
References: <24338@cup.portal.com> <4988@cbnewsc.ATT.COM>
Distribution: na
Organization: The Portal System (TM)
Lines: 9

Reply to Parent Message