Zorro II pinout

Article View: comp.sys.amiga.tech

Article #2334

Back to comp.sys.amiga.tech Previous Next

#2334

From: dougp
Date: Sun, 26 Nov 1989 06:37

8 lines
679 bytes

-Message-Text-Follows-

I'd like to know what signal is on pin 20 of the 100 pin edge connector
of the A2000 zorro II buss. I have an expansion chassis for my A1000,
an the trace which goes to this pin has a gap in it. I am wondering 
if this gap is intentional, or a mistake in the etching of the PC board.

Douglas Peale

Technical Details

Message-ID: <3131@hub.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!usc!ucsd!hub!dougp

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!mailrus!wuarchive!usc!ucsd!hub!dougp
From: dougp@voodoo.ucsb.edu
Newsgroups: comp.sys.amiga.tech
Subject: Zorro II pinout
Message-ID: <3131@hub.UUCP>
Date: 26 Nov 89 06:37:48 GMT
Sender: news@hub.UUCP
Distribution: usa
Organization: UC, Santa Barbara. Physics Computer Services
Lines: 8