Re: NEC-drive in 1010-housing

Article View: comp.sys.amiga.tech

Article #2711

Back to comp.sys.amiga.tech Previous Next

#2711

From: Steven Collins
Date: Wed, 13 Dec 1989 16:40

9 lines
847 bytes

I have built a 2 drive amiga external setup using NEC (ibm...) 3.5 drives.
The trick to get disk change to work is setting a jumper on the drive.
If I remember correctly, I had to solder a wire jumper in one place...
I can find out the exact jumper if it's not obvious. (the setup is at home...)
                                      steve


UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!collins
INET: collins@pnet02.gryphon.com

Technical Details

Message-ID: <23356@gryphon.COM>

Path:

arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!collins

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!usc!henry.jpl.nasa.gov!elroy.jpl.nasa.gov!gryphon!pnet02!collins
From: collins@pnet02.gryphon.com (Steven Collins)
Newsgroups: comp.sys.amiga.tech
Subject: Re: NEC-drive in 1010-housing
Message-ID: <23356@gryphon.COM>
Date: 13 Dec 89 16:40:21 GMT
Sender: root@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 9