Re: A500 hardware problem con't...

Article View: comp.sys.amiga.tech

Article #2839

Back to comp.sys.amiga.tech Previous Next

#2839

From: Steven Collins
Date: Fri, 19 Jan 1990 16:00

18 lines
1444 bytes

I don't recall the layout inside an A500, but in an A1000 it is VERY
easy to cut traces underneath any of the socketed chips by removing them
with a screwdriver. A real chip puller is greatly prefered...
I 'fixed' and A1000 for a friend of mine once this way, but eventually
found it by poking around with a logic probe... There is an excellent
file called 'the flake report' about things that go wrong on amigas.
It has many helpfull suggestions on possible problems and diagnostic
procedures. All I can find is my hardcopy right now, but it suggests
that a ram chip that is failed 'open' can be found by piggybacking
a known good ram chip on top. It also suggests that a bad ram chip 
that is failed 'short' might be hotter to the touch than good rams.

I will upload the whole thing, if I can find it and no one objects
to inflamably...
                                        steve collins

UUCP: {ames!elroy, <backbone>}!gryphon!pnet02!collins
INET: collins@pnet02.gryphon.com

Technical Details

Message-ID: <24986@gryphon.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!jarthur!elroy.jpl.nasa.gov!gryphon!pnet02!collins

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!jarvis.csri.toronto.edu!cs.utexas.edu!uwm.edu!uakari.primate.wisc.edu!brutus.cs.uiuc.edu!jarthur!elroy.jpl.nasa.gov!gryphon!pnet02!collins
From: collins@pnet02.gryphon.com (Steven Collins)
Newsgroups: comp.sys.amiga.tech
Subject: Re: A500 hardware problem con't...
Message-ID: <24986@gryphon.COM>
Date: 19 Jan 90 16:00:11 GMT
Sender: root@gryphon.COM
Organization: People-Net [pnet02], Redondo Beach, CA.
Lines: 18