Article View: comp.sys.amiga.tech
Article #3074Re: X-specs Control
From: Karri Tapani Palovuori
Date: Sun, 25 Mar 1990 09:20
Date: Sun, 25 Mar 1990 09:20
17 lines
1317 bytes
1317 bytes
In article <27863@cup.portal.com>, Peter_Warren_Lee@cup.portal.com writes: > Is there anyone out there that can tell me of a way to open and close > the shutters on the X-specs 3D glasses from Amigabasic? The bit for joystick fire button is the shutter control. (Was it bit 6 or bit 7 in $BFE001). First you set define this bit (pin) OUTPUT by corresponding control bit. If I remember correctly, a 1 means right lens open, left shut. And quess what a 0 means ;-). Because I don't have the glasses (only tried the programs with SEGA-glasses and a self-built interface) I'm not sure if the X-specs interface needs updating every frame or so. It's possible that it turns both lenses open if the signal stays same for some time. Karri P.S. The effect is really great, btw.
Technical Details
Message-ID:
<11949@etana.tut.fi>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!snorkelwacker!bloom-beacon!eru!luth!sunic!tut!kaakkuri!kp74615References:
<27863@cup.portal.com> <2343@ucqais.uc.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!snorkelwacker!bloom-beacon!eru!luth!sunic!tut!kaakkuri!kp74615 From: kp74615@kaakkuri.tut.fi (Karri Tapani Palovuori) Newsgroups: comp.sys.amiga.tech Subject: Re: X-specs Control Message-ID: <11949@etana.tut.fi> Date: 25 Mar 90 09:20:41 GMT References: <27863@cup.portal.com> <2343@ucqais.uc.edu> Sender: News@tut.fi Reply-To: kp74615@kaakkuri.tut.fi (Karri Tapani Palovuori) Organization: Tampere University of Technology, Finland Lines: 17