Getting interrupts on mouse ports

Article View: comp.sys.amiga.tech

Article #3100

Back to comp.sys.amiga.tech Previous Next

#3100

From: Dave Mc Mahan
Date: Wed, 28 Mar 1990 03:55

10 lines
923 bytes

 
I wish to be able to get an interrupt to my own little handler that would
be based upon an interrupt whenever some button (any button) on mouse port
2 changes (high to low OR low to high)	Is it possible to program this and
if so, how?  I expect about 2500 pulses per second worst case, and about
1000 pulses per second best case from an external circuit that feeds data
into the amiga in the form of PCM signals.  Any ideas?
 
   -dave

Technical Details

Message-ID: <10071@netcom.UUCP>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!netcom!mcmahan

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!brutus.cs.uiuc.edu!apple!netcom!mcmahan
From: mcmahan@netcom.UUCP (Dave Mc Mahan)
Newsgroups: comp.sys.amiga.tech
Subject: Getting interrupts on mouse ports
Summary: Need to find out state changes on Mouse Port 2
Message-ID: <10071@netcom.UUCP>
Date: 28 Mar 90 03:55:47 GMT
Organization: NetCom- The Bay Area's Public Access Unix System {408 249-0290 guest}
Lines: 10