Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!

Article View: comp.sys.amiga.tech

Article #3153

Back to comp.sys.amiga.tech Previous Next

#3153

From: sullivan - segall
Date: Sun, 15 Apr 1990 01:50

29 lines
1870 bytes

>
>** Begin quote **
>
>The problems stem from a combination of hardware and software.  The
>hardware problem is the Paula chip, which implements the serial
>interface.  It is slightly dumb; software must calculate parity and
>provide the start and stop bits, because Paula provides little more
>than a shift register.  The software must also provide the handshaking,
>whether XON/XOFF or RTS/CTS (7-wire).
>
Hey, this is EXACTLY what I need.  Does anyone know what the maximum
sustained serial output rate is for the PAULA chip w/o start and stop
bits?  (I need to output a serial data stream that is *continuous* ie:
has no start or stop bits, only periodic synch words.)... hmmm.

Btw: just looked in the hardware manual at the description of the output
register and it seems to enforce one start bit.  Oh well.
 
                           -Sullivan Segall
_________________________________________________________________
 
/V\  Sullivan  was the first to learn how to jump  without moving.
 '   Is it not proper that the student should surpass the teacher?
To Quote the immortal Socrates: "I drank what?" -Sullivan
_________________________________________________________________
 
Mail to: ...sun!portal!cup.portal.com!Sullivan or
         Sullivan@cup.portal.com

Technical Details

Message-ID: <28954@cup.portal.com>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!dali!ogicse!decwrl!fernwood!portal!cup.portal.com!Sullivan

References: <02373.AA02373@spirit.kref.sub.org> <19640@grebyn.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!uakari.primate.wisc.edu!dali!ogicse!decwrl!fernwood!portal!cup.portal.com!Sullivan
From: Sullivan@cup.portal.com (sullivan - segall)
Newsgroups: comp.sys.amiga.tech,comp.sys.amiga.hardware
Subject: Re: AMIGA too slow for speeds higher than 9600 Baud? HELP!
Message-ID: <28954@cup.portal.com>
Date: 15 Apr 90 01:50:33 GMT
References: <02373.AA02373@spirit.kref.sub.org> <19640@grebyn.com>
Distribution: na
Organization: The Portal System (TM)
Lines: 29

Reply to Parent Message