🚀 go-pugleaf

In <1748@corpane.UUCP>, sparks@corpane.UUCP (John Sparks) writes:
>S36666WB@ETSUACAD.BITNET (Brian Wright) writes:
>>I will agree that the 500 comes standard with 512k of ram and then add the
>>extra 512k to make 1 meg.  It isn't, however, that hard to add a fatter
>>agnus to the 500 for those with 1 meg.  I know of several people who have
>>already done it.  I still don't know why the Hold up.  Perhaps a trace
>>cut and/or a jumper for the 512k ROM?
>
>correct me if I am wrong, but I think that the extra 512K expansion board
>on a 500 is not considered chip mem but fast mem. Even with the 1 meg
>Agnus chip you would only have 512K of actual chip ram and 512K of fast ram.
>
>You would have to do some modifications (either some trace cutting or adding
>in the other 512K on the mother board) in order to get the 1 Meg of chip ram
>on a 500.

The 512K expansion becomes CHIP mem when you change the Agnus jumper to tell it
to be CHIP mem.

-larry

--
NeXT. The hardware makes it a PC. The software makes it a workstation.
      The units shipped makes it a mainframe.  -=stolen from Hazy=-
+-----------------------------------------------------------------------+ 
|   //   Larry Phillips                                                 |
| \X/    lphillips@lpami.wimsey.bc.ca -or- uunet!van-bc!lpami!lphillips |
|        COMPUSERVE: 76703,4322  -or-  76703.4322@compuserve.com        |
+-----------------------------------------------------------------------+