Bad sector mapping

Article View: comp.sys.amiga.tech

Article #3534

Back to comp.sys.amiga.tech Previous Next

#3534

From: RDBROWN
Date: Wed, 09 May 1990 01:19

19 lines
1069 bytes

In messege <11343@shlump.nac.dec.com>, guineau@wjg.enet.dec.com
     (Digital Equipment Corporation, Marlboro, MA) says...

>I'd like to get some utility to find and map out bad spots to save me
>from backing up the rest of the 100MB's on the physical disk to do a
>SCSI level format...

DiskSalv would be one of the utilities you'ld want if you ran across
this sort of problem.

A program I sometimes use to help locate bad disk blocks is called
BFORMAT. It formats disks and performs a check to determine if any
tracks are going to fail, then maps them as being in-use. It is slow
because of the disk-error checking, but it is effective in catching
problems with the media before it's too late.


Robert Brown
RDBROWN@UALR.BITNET

Technical Details

Message-ID: <99DF7448AE9F80082D@UALR.BITNET>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!ucsd!ucbvax!UALR.BITNET!RDBROWN

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!sdd.hp.com!ucsd!ucbvax!UALR.BITNET!RDBROWN
From: RDBROWN@UALR.BITNET
Newsgroups: comp.sys.amiga.tech
Subject: Bad sector mapping
Message-ID: <99DF7448AE9F80082D@UALR.BITNET>
Date: 9 May 90 01:19:00 GMT
Sender: daemon@ucbvax.BERKELEY.EDU
Lines: 19