🚀 go-pugleaf

In <90160.152619LEEK@QUCDN.BITNET>, LEEK@QUCDN.QueensU.CA writes:
>In article <21524@estelle.udel.EDU>, new@udel.EDU (Darren New) says:
>>
>>In article <90159.131952LEEK@QUCDN.BITNET> LEEK@QUCDN.QueensU.CA writes:
>>>The serial port is probably the only "safe" port
>>>to plug & unplug devices when the machine is on
>
>I said that because the output chip 1488 have some form of current
>limiting while the input chip 1489 can handle +/- 30V inputs.  For
>most conditions, they are almost indestructive.  (I've them blowing
>up on a 68HC11 Evaluation Board - but that shouldn't happen in the Amiga)

I can tell you that it is definitely possible to blow a 1488 or 1489, because
this klutz has done it. I slipped while plugging the cable into the modem, and
shorted something with the shell of the connector. The 148x got real warm, real
fast, and did so when I powered the machine on later. At least it was easy to
find the problem. :-)

-larry

--
The raytracer of justice recurses slowly, but it renders exceedingly fine.
+-----------------------------------------------------------------------+ 
|   //   Larry Phillips                                                 |
| \X/    lphillips@lpami.wimsey.bc.ca -or- uunet!van-bc!lpami!lphillips |
|        COMPUSERVE: 76703,4322  -or-  76703.4322@compuserve.com        |
+-----------------------------------------------------------------------+