Ansi control sequences in CON: & NEWCON:

Article View: comp.sys.amiga.tech

Article #4038

Back to comp.sys.amiga.tech Previous Next

#4038

From: Michael Bergman
Date: Wed, 13 Jun 1990 11:48

39 lines
1964 bytes

Hello, everyone.

The AmigaANSI terminal control sequences continue to give me trouble.

I have been looking for them in all the docs I have (except the RKM:s because
I don't have then with me right now :-( but I found nothing that described
them all like I want them. Sure, I know that *E[1m changes attributes,
*E[xx;yyH is absolute cursor positioning and so on.
But what I'd like is a complete table of *all* the control sequences available
in CON:, NEWCON:, CONMAN: and RAW:. (decimal ASCII values for everything too!)

Something like this:

Cursor positioning    ESC+[xx;yyH
Bold on               ESC+[1m
Cursor up             ESC+[nA
Cursor down           ESC+[nD
Delete line           ESC+[nM
Form feed             ^L
Line feed             ^J
Carriage return       ^M

(Where n stands for a dec. number in ASCII form)

Has someone produced such a table or know how I can get all the info??
Note that I want *all* of it - CON:, NEWCON:, CONMAN: and RAW:.
I've also tried using Kent Polks (kent@swrinde.nde.swri.edu) Amiga termcap 1.2
with Fterms in DNet 2.10, but it doesn't work at all. Anyone else had any luck?
I'm planning to find out what's wrong and write a termcap that works with DNet
2.10 run under UNIX.

Mike

-- 
      Michael Bergman         Internet: d88-mbe@sm.luth.se
  //  Undergrad. Comp. Eng.   BITNET:   d88-mbe%sm.luth.se@kth.se
\X/   U of Lulea, SWEDEN      ARPA:     d88-mbe%sm.luth.se@ucbvax.berkeley.edu
			      UUCP:  {uunet,mcvax}!sunic.se!sm.luth.se!d88-mbe

Technical Details

Message-ID: <1005@tau.sm.luth.se>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!dali.cs.montana.edu!rpi!uupsi!sunic!luth!d88-mbe

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!dali.cs.montana.edu!rpi!uupsi!sunic!luth!d88-mbe
From: d88-mbe@sm.luth.se (Michael Bergman)
Newsgroups: comp.sys.amiga.tech
Subject: Ansi control sequences in CON: & NEWCON:
Message-ID: <1005@tau.sm.luth.se>
Date: 13 Jun 90 11:48:46 GMT
Reply-To: Michael Bergman <d88-mbe@sm.luth.se>
Organization: University of Lulea, Sweden
Lines: 39
UUCP-Path: {uunet,mcvax}!sunic!sm.luth.se!d88-mbe