🚀 go-pugleaf

In article <tracy.0021@taishan.cinnet.com> tracy@taishan.cinnet.com (Tracy S. Schuhwerk) writes:
>Has anyone successfully used the latest version of UUCP (1.06) on the
>3000 yet?  I just tried and failed miserably.  Seems like it wants to
>Guru the machine on a write to the HD (THE GURU WILL NEVER DIE!).  I
>was running 1.03 with limited success (I had to run it under KS 1.3)
>but 1.06 dies under both KS 2.0 and 1.3!


My own UUCP node is having some severe problems as well.  It started out
perfect and was running fine for days, then it began to give error messages
(in the logfile) and not transfer anything during sessions, and finally
it's just not transmitting or receiving (though it does connect succesfully).
All this happened very shortly after (but not right as) I switched to v1.06D
from 1.05... I too had a HD crash during a UUCP session as well, but I'm not
sure that was at all related.

For a while I was using a hybrid, the uucico and uuname of v1.05 and the rest
from 1.06 due to a warning from a friend, but neither a pure 1.06 nor (to date)
reversion to 1.05 has been successful.  I'm still trying a few more things 
(since it worked exactly once after my HD crash I'm going to re-restore it from
the backup floppies and see if I can get it running again) and I hope to get
it running again eventually.   BTW: I'm running a 3 meg, KS1.3 A-500 with
an A-590 and a super Agnus.

.                            <<<<Infinite K>>>>

 
--
.---------------------------------------------------------------------------.
|Ben Scott, professional goof-off and consultant at The Raster Image, Denver|
|Amiga UUCP node domain: bscott@vila.denver.co.us Else: bscott@nyx.cs.du.edu|
|FIDO point address 1:104/421.2, or call the Arvada 68K BBS at (303)424-9831|
|"Don't embarrass us..."  "Have I ever?" - Buckaroo Banzai  | *AMIGA POWER* |
`---------------------------------------------------------------------------'