Re: EXECUTE errors

Article View: comp.sys.amiga.tech

Article #4173

Back to comp.sys.amiga.tech Previous Next

#4173

From: Peter Kittel GERMANY
Date: Tue, 03 Jul 1990 07:59

18 lines
1240 bytes

In article <alfredo.7122@ajahnv.lonestar.org> alfredo@ajahnv.lonestar.org (Alfredo Jahn V) writes:
>I have never used the "execute" command before and I'm having some
>problmes...  I am trying a new boot process where a short startup-
>sequence file EXECUTEs another file on the hard disk.  I get the
>following error:
>
>EXECUTE: No K directive
>DH0:c/execute failed returncode 20

For me it sounds like you forgot to provide the correct path for your
script file in the execute command. The error message said execute
failed but it doesn't say that something _inside_ the script failed.
The K directive doesn't have anything to do with this message.

-- 
Best regards, Dr. Peter Kittel      //     E-Mail to 
Commodore Frankfurt, Germany      \X/      rutgers!cbmvax!cbmger!peterk

Technical Details

Message-ID: <253@cbmger.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!rutgers!cbmvax!cbmehq!cbmger!peterk

References: <alfredo.7122@ajahnv.lonestar.org>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!snorkelwacker!usc!cs.utexas.edu!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: EXECUTE errors
Message-ID: <253@cbmger.UUCP>
Date: 3 Jul 90 07:59:21 GMT
References: <alfredo.7122@ajahnv.lonestar.org>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 18

Reply to Parent Message