A2091 Problem

Article View: comp.sys.amiga.tech

Article #4213

Back to comp.sys.amiga.tech Previous Next

#4213

From: Steve Snow
Date: Mon, 02 Jul 1990 16:50

16 lines
1302 bytes

I have a stock Amiga 2000 with an A2091 hard disk controller populated with
2 megs of ram and a Micropolis 1558 150 meg SCSI drive. The problem is that 
I will be doing disk access and get the "Disk DH0 has a read/write error"
requestor. Clicking on Cancel or Retry makes no difference. After rebooting
I get the insert disk screen and the hard drive is gone. Booting up the 
workbench floppy shows no harddrive. The only way I have found to get the 
drive back is to low-level format and re-install everyting from scratch.

This has been very frustrating since it has happened 5 times in the past 3 days.I would appreciate any ideas anyone may have.

Steve Snow
-- 
Steve Snow| Corpane Industries  | DISK Inc.                | DISK   300-1200bd
          | 10100 Bluegrass Pkwy| 5716 Outer Loop          |   (502)968-5401
          | Louisville, KY 40299| Louisville, KY 40219     |        thru
          |..uunet!corpane!steve| ..uunet!disk!steve       |   (502)968-5406

Technical Details

Message-ID: <2500@corpane.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!att!mcdchg!ddsw1!corpane!steve

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!att!mcdchg!ddsw1!corpane!steve
From: steve@corpane.UUCP (Steve Snow)
Newsgroups: comp.sys.amiga.tech
Subject: A2091 Problem
Message-ID: <2500@corpane.UUCP>
Date: 2 Jul 90 16:50:52 GMT
Organization: Corpane Industries, Inc., Louisville Ky
Lines: 16