Re: BridgeBoard->Amiga data transfer

Article View: comp.sys.amiga.tech

Article #4355

Back to comp.sys.amiga.tech Previous Next

#4355

From: Peter Kittel GERMANY
Date: Fri, 13 Jul 1990 07:53

19 lines
1519 bytes

In article <27191@swrinde.nde.swri.edu> kent@swrinde.nde.swri.edu (Kent D. Polk) writes:
>I have heard rumors as to the existence of software which will allow an
>Amiga to read PC-Bridgeboard memory directly. If you can confirm and point
>me in the correct direction to obtain such information, I sure would
>appreciate it.

You can only read that PC memory directly from the Amiga side that is
part of the 256 KB dual-ported RAM. So there are addresses for the video
memories (text/CGA, Byte/word/graphics access) and to some I/O space.
The normal RAM isn't accessible directly, though one can imagine software
using Janus library calls (on both sides) to do this.
To access this from the Amiga side you need to know the board's basis
address it got during auftoconfig. You get it using FindConfDev. All
this is documented in the Tech Ref Manual for the Amiga available from CATS.

-- 
Best regards, Dr. Peter Kittel      //     E-Mail to 
Commodore Frankfurt, Germany      \X/      rutgers!cbmvax!cbmger!peterk

Technical Details

Message-ID: <280@cbmger.UUCP>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rutgers!cbmvax!cbmehq!cbmger!peterk

References: <27191@swrinde.nde.swri.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!rutgers!cbmvax!cbmehq!cbmger!peterk
From: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Newsgroups: comp.sys.amiga.tech
Subject: Re: BridgeBoard->Amiga data transfer
Keywords: BridgeBoard, Janus
Message-ID: <280@cbmger.UUCP>
Date: 13 Jul 90 07:53:03 GMT
References: <27191@swrinde.nde.swri.edu>
Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY)
Organization: Commodore Bueromaschinen GmbH, West Germany
Lines: 19

Reply to Parent Message