A3000 and a genlock

Article View: comp.sys.amiga.tech

Article #4363

Back to comp.sys.amiga.tech Previous Next

#4363

From: Stephen Moehle
Date: Sun, 15 Jul 1990 02:51

14 lines
1185 bytes

I have an A3000 with a 1950 monitor.  I am using 2.0 (Kickstart version 36.141.
Workbench version 36.68).  I also have a Commodore A2300 internal genlock
which I cannot get to work with the VDE.  When I put the genlock in, the 1950
cannot sync up to the signal coming out of the 3000.  With the VDE on, the 1950
looks like the vertical hold is off, but adjusting the vertical hold on the
monitor does not help.  Turning the VDE off makes things worse.  The monitor
does not display anything recognizable, but it looks just like what is coming
out of the 23 pin port.  However, when I plug the monitor into the 23 pin
port on the genlock, the display is fine.  Help!  How can I get this to work?
Thanks.

Stephe
sjm@well.sf.ca.us     or     {ucbvax,pacbell,hplabs}!well!sjm     
"You heard the weirdo man.  What is truth?"

Technical Details

Message-ID: <19027@well.sf.ca.us>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!apple!well!sjm

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!swrinde!zaphod.mps.ohio-state.edu!usc!apple!well!sjm
From: sjm@well.sf.ca.us (Stephen Moehle)
Newsgroups: comp.sys.amiga.tech
Subject: A3000 and a genlock
Keywords: A3000 genlock A2300
Message-ID: <19027@well.sf.ca.us>
Date: 15 Jul 90 02:51:38 GMT
Distribution: comp
Lines: 14