Using A2232 and serial printer on A3000

Article View: comp.sys.amiga.tech

Article #4489

Back to comp.sys.amiga.tech Previous Next

#4489

From: Bruce Albrecht
Date: Sun, 22 Jul 1990 04:05

15 lines
1245 bytes

I just received my A3000, with an A2232 7 port serial card (yeah!), and I'm
having trouble getting it to print to a serial printer.  The printer is in the
Amiga 3000 serial port, and I have a modem in the first A2232 DIN connector.
Whenever I attempt to write to the printer, it fails.  I know that it isn't a
problem with the connector, because when I run JRCOMM, I can use the serial
device unit 1, and output shows up on the printer.

I suspect it may be a problem with the A2232 software.  It appears to have a
1.3 style preferences, and I am running 2.0.  Also, it seems to me that the
printer preferences should support a serial device unit number.  Is there an
AmigaOS 2.0 version of the A2232 software?

UUCP: {amdahl!bungia, uunet!rosevax, crash}!orbit!pnet51!bga
ARPA: crash!orbit!pnet51!bga@nosc.mil
INET: bga@pnet51.orb.mn.org

Technical Details

Message-ID: <2904@orbit.cts.com>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!nosc!crash!orbit!pnet51!bga

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!samsung!zaphod.mps.ohio-state.edu!sdd.hp.com!ucsd!nosc!crash!orbit!pnet51!bga
From: bga@pnet51.orb.mn.org (Bruce Albrecht)
Newsgroups: comp.sys.amiga.tech
Subject: Using A2232 and serial printer on A3000
Message-ID: <2904@orbit.cts.com>
Date: 22 Jul 90 04:05:01 GMT
Sender: root@orbit.cts.com
Organization: People-Net [pnet51], Minneapolis, MN.
Lines: 15