Converting NTSC 2000 to PAL

Article View: comp.sys.amiga.tech

Article #455

Back to comp.sys.amiga.tech Previous Next

#455

From: Dennis Rapaport
Date: Wed, 12 Jul 1989 08:41

9 lines
829 bytes

In order to do image digitization with a DigiView and PAL camera it
would be nice if we could convert one of our NTSC 2000's to work
in PAL mode. Is this simply a matter of switching the 8370 Agnus
to an 8371 and changing the oscillator from 28.636mhz to 28.375,
or are there other more subtle changes involved? (We would of
course use the right monitor.)
(Thanks Dave H for advice on the hard disk/2620 problem - it was
a case of software timing.)
Dennis R.

Technical Details

Message-ID: <608F67241@BARILVM>

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!gatech!psuvax1!psuvm.bitnet!barilvm.bitnet!f67241

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!jarvis.csri.toronto.edu!rutgers!gatech!psuvax1!psuvm.bitnet!barilvm.bitnet!f67241
From: F67241@BARILVM.BITNET (Dennis Rapaport)
Newsgroups: comp.sys.amiga.tech
Subject: Converting NTSC 2000 to PAL
Message-ID: <608F67241@BARILVM>
Date: 12 Jul 89 08:41:47 GMT
Organization: Bar-Ilan University Computing Center, Israel
Lines: 9