Article View: comp.sys.amiga.tech
Article #4704Re: Noclick on the A3000
From: mjl
Date: Sun, 05 Aug 1990 10:22
Date: Sun, 05 Aug 1990 10:22
18 lines
1505 bytes
1505 bytes
In article <1990Aug1.051429.1978@msuinfo.cl.msu.edu> dailey@kira.uucp (Chris Dailey) writes: > >Couldn't you just reset the BootPri for the hard drive to a higher >value? Then it would work no matter what on a WARM reboot, right? >Any gurus out there care to verify that? > > /~\ Chris Dailey (CPS Undergrad, SOC Lab Coord, AMIG user group Secretary) Could lead to trouble. If you somehow trashed your drive so that it would boot but then hang, you'd have no recourse but to physically remove the drive in order to get your system back up again. I've had that happen with RAD: when I set its BootPri greater than than of df0: -- but at least in that case turning off the machine gets rid of the problem. Still, the odds of that happening to your hard drive are probably small (at least I hope so :-). Maurice LeBrun Institute for Fusion Studies mjl@fusion.ph.utexas.edu University of Texas at Austin
Technical Details
Message-ID:
<35191@ut-emx.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!ut-emx!mjlReferences:
<1990Jul26.144452.8771@cbnewsl.att.com> <1990Jul27.050454.11169@cbnewsm.att.com> <1990Jul31.155439.21621@IRO.UMontreal.CA> <1990Aug1.051429.1978@msuinfo.cl.msu.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!mailrus!uwm.edu!cs.utexas.edu!ut-emx!mjl From: mjl@ut-emx.UUCP (mjl) Newsgroups: comp.sys.amiga.tech Subject: Re: Noclick on the A3000 Message-ID: <35191@ut-emx.UUCP> Date: 5 Aug 90 10:22:27 GMT References: <1990Jul26.144452.8771@cbnewsl.att.com> <1990Jul27.050454.11169@cbnewsm.att.com> <1990Jul31.155439.21621@IRO.UMontreal.CA> <1990Aug1.051429.1978@msuinfo.cl.msu.edu> Reply-To: mjl@emx.UUCP (Maurice LeBrun) Distribution: na Organization: UTexas Computation Center, Austin, Texas Lines: 18