2090 and Starboard2 in A2000

Article View: comp.sys.amiga.tech

Article #4952

Back to comp.sys.amiga.tech Previous Next

#4952

From: Ian Penman
Date: Mon, 20 Aug 1990 19:45

24 lines
1119 bytes

Autoconfig Problems

This question may have been answered in the past, but I don't have access
to any of the archive sites.


Here goes:

  I have a 2000 (rev 4.2 motherboard) with the 1.2 ROMS and a 2090 ST506/scsi
  hard disk controller card.  This works just fine.

  When I add a Microbotics StarBoard2 (2 mB) with the Microbotics 2010 Zorro-I
  to A1000 interface card, the system does one of two things:

  a) if the 2090 is installed before the RAM the memory doesn't autoconfig.

  b) if the RAM is installed before the 2090 then the disk drive is not
     available.

     I am hoping that there is an easy solution to the problem.


     Thanx 
     Ian Penman

Technical Details

Message-ID: <9890004@hpmxoip.HP.COM>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!rex!samsung!uakari.primate.wisc.edu!sdd.hp.com!hplabs!hpcc01!hpcuhb!hpcllla!hpclisp!hpmxoip!ianp

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!clyde.concordia.ca!uunet!wuarchive!rex!samsung!uakari.primate.wisc.edu!sdd.hp.com!hplabs!hpcc01!hpcuhb!hpcllla!hpclisp!hpmxoip!ianp
From: ianp@hpmxoip.HP.COM (Ian Penman)
Newsgroups: comp.sys.amiga.tech
Subject: 2090 and Starboard2 in A2000
Message-ID: <9890004@hpmxoip.HP.COM>
Date: 20 Aug 90 19:45:50 GMT
Organization: Hewlett-Packard Calif. Language Lab
Lines: 24