Article View: comp.sys.amiga.tech
Article #4985Re: More Palomax Woes
From: Lindsay Markus
Date: Tue, 21 Aug 1990 16:59
Date: Tue, 21 Aug 1990 16:59
25 lines
1312 bytes
1312 bytes
From article <12606@hydra.gatech.EDU>, by gt4662b@prism.gatech.EDU (BRANHAM,JOSEPH FRANKLIN): > It also seems that the Palomax interface doesn't like my Alegra memory > expansion for my 1000 (or vice versa). > > The 1000 comes up, loads kickstart, and warm resets itself endlessly. > > Has anyone had a similar problem when using the pass-through of the PAlomax > or with using an Alegra board with other peripherals? > The problem you are running into is primarily the A1000 bus. Constructivly I can tell you I got the MAX interface working with LUCAS and Kwikstart simultaneously. I used FACT (ACT) chips for the parts that interface with the A1000 bus. These parts are fast and low power. Also make sure you have a 10k pullup resistor tied to the reset line (I believe the reset line is 53 but don't blame me if I am wrong.) Call PALOMAX. Mr. Koehler gives EXCELLENT customer support. 215-672-6815 Lindsay Markus
Technical Details
Message-ID:
<575@jtids.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!sdd.hp.com!uakari.primate.wisc.edu!aplcen!haven!udel!burdvax!jtids!flashReferences:
<12606@hydra.gatech.EDU>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!rutgers!cs.utexas.edu!sdd.hp.com!uakari.primate.wisc.edu!aplcen!haven!udel!burdvax!jtids!flash From: flash@jtids.UUCP (Lindsay Markus ) Newsgroups: comp.sys.amiga.tech Subject: Re: More Palomax Woes Message-ID: <575@jtids.UUCP> Date: 21 Aug 90 16:59:40 GMT References: <12606@hydra.gatech.EDU> Lines: 25