Article View: comp.sys.amiga.tech
Article #56292.0 problems with GVP controller
From: Alfredo Jahn V
Date: Thu, 04 Oct 1990 01:35
Date: Thu, 04 Oct 1990 01:35
24 lines
1590 bytes
1590 bytes
I am trying to bring up the 2.02 beta OS on my A2000. If I boot up
on the stock workbench floppy, the system comes up (it doesn't know
about the hard disk). I copied the hard disk driver (supplied by
GVP with it's IMPACT A2000 SCSI Plus 8 controller board) into the
floppy's expansion directory. Now when I boot up, I hear the hard
disk make a short bit of access noise, then I get a "task held"
requestor! Any ideas? The startup-sequence does a "binddrivers"
call. Do I need a different version of the scsi GVP driver??
I am using ZKICK to install the kickstart...
System: A2000, 1.2 ROMS, 5 Meg RAM, GVP controller, Rodime 205 Meg
hard disk, Developer PreRelease 9/17/90 2.02 (36.77).
BTW, the system works just fine with 1.3...
Please EMAIL any suggestions and/or comments. Thanks in advance.
- alfredo jahn
-------------------------------//-----------------------------------------
Alfredo Jahn V // Internet: alfredo@ajahnv.lonestar.org
3208 Cole Avenue \\ // UUCP: {convex,uunet}!digi!ajahnv!alfredo
Dallas, TX 75204 USA \X/ Voice: (214) 855-1316
--------------------------------------------------------------------------
Technical Details
Message-ID:
<alfredo.8170@ajahnv.lonestar.org>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!bu.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!newstop!texsun!digi.lonestar.org!ajahnv!alfredoShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!bu.edu!rpi!zaphod.mps.ohio-state.edu!swrinde!cs.utexas.edu!sun-barr!newstop!texsun!digi.lonestar.org!ajahnv!alfredo From: alfredo@ajahnv.lonestar.org (Alfredo Jahn V) Newsgroups: comp.sys.amiga.tech Subject: 2.0 problems with GVP controller Message-ID: <alfredo.8170@ajahnv.lonestar.org> Date: 4 Oct 90 01:35:26 GMT Lines: 24