🚀 go-pugleaf

In article <1990Oct11.012013.24234@hoss.unl.edu>
252u3130@fergvax.unl.edu (Phil Dietz) writes:

> I'm using Lattice 'C' and I'm changing the current
> directory in it. Well, when the program quits, the SHELL
> path and the current directory are off.  I need to find
> out what the command is to read the name of the current
> directory so I can chdir to it at the end of the program.

Except for built-in shell commands (e.g. CD), no-one is
allowed to change the current directory permanently: The
pr_CurrentDir field of the process structure must be the
same on exit() as it was on main(), i.e. it must not only
refer to the same directory, but it must also be the _same_
lock, not just a copy of it! (As far as I remember, this is
also true for Workbench processes.)

The easiest way to achieve this, would be:

main()
 {
 BPTR orig_cd, cd;

 if(cd = Lock("", ACCESS_READ))
  {
  orig_cd = CurrentDir(cd);

  /* now you can chdir() as often as you like */

  UnLock(CurrentDir(orig_cd));
  }
 }

True, this _should_ be done by the compiler's startup-code.

Ralph