Article View: comp.sys.amiga.tech
Article #6147Re: Assembly Language
From: John Schultz
Date: Sun, 28 Oct 1990 19:56
Date: Sun, 28 Oct 1990 19:56
16 lines
1131 bytes
1131 bytes
I've used Lattice's ASM, CAPE 2.5, Devpac 2.0, and Adapt. If you've got Lattice (or now SAS), you can use ASM for most simple things (it's quite slow). Devpac 2.0 is the fastest assembler of the bunch, but has some goofy syntax (like forcing you to place a switch as the first line of your file). Devpac 2.0 and CAPE 2.5 do not support the 68020/30/40/881/882. Adapt was written by Howesoft, and works just like CAPE (Gee, I wonder why?) It's basically a faster CAPE with 680x0/881/882 support. One of the cool features of Adapt, is the ability to disassemble code showing cycle times per instruction. No more looking through the book! Adapt is your best bet out of this lot. John
Technical Details
Message-ID:
<5324@crash.cts.com>Path:
arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!ucsd!nosc!crash!jcsReferences:
<1990Oct26.233149.8978@jato.jpl.nasa.gov> <1990Oct28.122933.9545@canterbury>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!cs.utexas.edu!swrinde!ucsd!nosc!crash!jcs From: jcs@crash.cts.com (John Schultz) Newsgroups: comp.sys.amiga.tech Subject: Re: Assembly Language Message-ID: <5324@crash.cts.com> Date: 28 Oct 90 19:56:48 GMT References: <1990Oct26.233149.8978@jato.jpl.nasa.gov> <1990Oct28.122933.9545@canterbury> Distribution: comp.sys.amiga.tech Organization: Crash TimeSharing, El Cajon, CA Lines: 16