Sksh and 2.0 Internal commands

Article View: comp.sys.amiga.tech

Article #6151

Back to comp.sys.amiga.tech Previous Next

#6151

From: Angst
Date: Sun, 28 Oct 1990 23:35

18 lines
1089 bytes

I've just got SKsh 1.4 running on my A3000 (with no fuss at all; finally a
reall shell!).  Since it doesn't know anything about 2.0, it comes as no
surprise that the commands that are internal with 2.0 (i.e. run) aren't
available.  Strangely, srun doesn't do anything either (it worked when I
installed SKsh 1.4, but not upon reboot).

Is there anything I can put in .sksh* to re-install the internal commands or
prevent them from being removed ?

Thanks,

Angst

---------------
The Moth: "GOOD LORD! TICK! You've been hit in the head by a ... by a meteor!!"
The Tick: "I can understand your amazement, Arthur. But believe me, the novelty
	   wears off after the first few times."
---------------

Technical Details

Message-ID: <5441@uqcspe.cs.uq.oz.au>

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!brolga!uqcspe!batserver.cs.uq.oz.au!angst

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!attcan!uunet!munnari.oz.au!brolga!uqcspe!batserver.cs.uq.oz.au!angst
From: angst@batserver.cs.uq.oz.au (Angst)
Newsgroups: comp.sys.amiga.tech
Subject: Sksh and 2.0 Internal commands
Message-ID: <5441@uqcspe.cs.uq.oz.au>
Date: 28 Oct 90 23:35:54 GMT
Sender: news@uqcspe.cs.uq.oz.au
Reply-To: angst@batserver.cs.uq.oz.au
Distribution: comp
Lines: 18