🚀 go-pugleaf

In article <1990Nov19.202344.13666@en.ecn.purdue.edu> galocy@en.ecn.purdue.edu (Keith B Galocy) writes:
>
>I just bought a new 330meg SCSI for my 2091 controller.  It's really
>fast on the Amiga (15-17ms or so) but the partition I set up for my
>bridge card is dragging in a major way.  The ten meg partition I had
>(have) on my quantum is slow but acceptable.  I set up a 72meg partition
>on the new drive and partitioned it with fdisk to 32meg, 32meg, 8meg.  
>I've only used half of the first 32 meg and already it is nearly too slow
>to use.  Word Perfect 5.1 is ridiculous.  Anyway, I want to know if I'm 
>doing something wrong or if my pc partition is too big or my (probable 
>cause) Amiga partition is too large.  By the way, I've also got the 2630
>if that makes a difference.  Any insight would be greatly appreciated
>because I've been unable to use it...

if you've got a few hundred K of unused RAM available, try doing
	addbuffers xyz: 400
where xyz: is the amiga partition containing your fake ms-dos partition file.
it's almost respectable after you do that.

the reason is that the filesystem can't keep enough data (filesystem linkage
blocks and such) in memory to efficiently do random seeks on a large file
(10 meg) unless you give it lots of buffers.

>						Thanks,  Keith.

  --Scotty

-- 
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Scott Drysdale           Software Engineer
Commodore Amiga Inc.     UUCP {allegra|burdvax|rutgers|ihnp4}!cbmvax!drysdale
		         PHONE (hopefully sometime this year)
"Have you hugged your hog today?"
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=