?? Bug In SKSH ??????

Article View: comp.sys.amiga.tech

Article #6853

Back to comp.sys.amiga.tech Previous Next

#6853

From: stenkvist
Date: Tue, 20 Nov 1990 09:45

16 lines
1323 bytes

I'm trying to get SKSH (the Unix like shell ) to work on my Amiga, but there seems to be a bug when used together with the A590 harddisc. When i start SKSH it newer alters the path. I use 'path -add ......' in the .skshrc file but the path always remain as '.,c:' or something. The ONLY way I found to make the path command work is to execute the Check_1.6SKSH command. It works even if I type Ctrl-c at the start of execution. This was all very confusing so I tried to disconnect the hard drive and start from 











a
ordinar disc. This worked fine, so I connected the hard drive again and booted from the sane disc, and the problem was back. ( i've tried this for some times and it almost works the same. )

Is this a bug in SKSH or in the A590 or what ? . The version of SKSH I.ve tried is 1.6 alfa.

Technical Details

Message-ID: <0093FFDD.98022880@lne.kth.se>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!think.com!mintaka!bloom-beacon!eru!hagbard!sunic!kth.se!news

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!wuarchive!zaphod.mps.ohio-state.edu!think.com!mintaka!bloom-beacon!eru!hagbard!sunic!kth.se!news
From: stenkvist@lne.kth.se
Newsgroups: comp.sys.amiga.tech
Subject: ?? Bug In SKSH ??????
Message-ID: <0093FFDD.98022880@lne.kth.se>
Date: 20 Nov 90 09:45:23 GMT
Sender: news@kth.se  (News Administrator)
Reply-To: stenkvist@lne.kth.se
Organization: KTH, Royal Institute of Technology, School of Electrical Engineering
Lines: 6