Re: FastFileSystem

Article View: comp.sys.amiga.tech

Article #7524

Back to comp.sys.amiga.tech Previous Next

#7524

From: markv
Date: Tue, 18 Dec 1990 16:43

19 lines
1364 bytes

>>You can mount the 1.3 FastFileSystem on a floppy via the mount command and
>>a suitable mountlist.  Just copy the default entry for RAD: and change
>>device to "trackdisk.device" and add Mask=0x7ffff to force the FS to do
>>all direct device access via CHIP buffers.
> 
> I forgot to add that you will have to manually run the Diskchange command
> every time you change the floppy.  1.3 FS doesn't automatically recognise
> diskchanges (because it was originally designed for non-removeable hard
> drives).  You will also want to set BuffMemType to CHIP memory in the
> MountList.

Or get "AutoDiskChange" a program that monitors for DISKCHANGE events
and then sends a DiskChange command to the drive.  Note that if you
dont Diskchange a FFS floppy under 1.3 you can seriously trash the
next disk...
 
> 	Steve
-- 
Mark

Technical Details

Message-ID: <27510.276df2d5@kuhub.cc.ukans.edu>

Path:

arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!kuhub.cc.ukans.edu!markv

References: <1990Dec14.195644.27027@msuinfo.cl.msu.edu> <16549@cbmvax.commodore.com> <16550@cbmvax.commodore.com>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!usc!zaphod.mps.ohio-state.edu!maverick.ksu.ksu.edu!kuhub.cc.ukans.edu!markv
From: markv@kuhub.cc.ukans.edu
Newsgroups: comp.sys.amiga.tech
Subject: Re: FastFileSystem
Message-ID: <27510.276df2d5@kuhub.cc.ukans.edu>
Date: 18 Dec 90 16:43:33 GMT
References: <1990Dec14.195644.27027@msuinfo.cl.msu.edu> <16549@cbmvax.commodore.com> <16550@cbmvax.commodore.com>
Distribution: comp
Organization: University of Kansas Academic Computing Services
Lines: 19

Reply to Parent Message