Article View: comp.sys.amiga.tech
Article #7556Enforcer Question
From: joachim
Date: Wed, 19 Dec 1990 01:52
Date: Wed, 19 Dec 1990 01:52
22 lines
1009 bytes
1009 bytes
Hi - I've got a question concerning the enforcer4 debugging tool: Currently I'm using a non-DMA, non-autoconfig HD-Controler which is memory-mapped around 0xEF0000. The enforcer4 doesn't like the device's accesses to these locations thus disabling any access to the HD. My question: Is there a way to convince the enforcer that reads & writes to a specific area is ok (e.g. by manipulating system structures) ? Should anybody out there in Netland know the answer please let me know . Regards Peter Joachim <joachim@urz.unibas.ch> PS: Thanks a lot to the authors of enforcer! This little program made debugging really VERY MUCH easier!
Technical Details
Message-ID:
<1990Dec19.025211.1258@urz.unibas.ch>Path:
arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!cernvax!chx400!urz.unibas.ch!joachimShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!mcsun!cernvax!chx400!urz.unibas.ch!joachim From: joachim@urz.unibas.ch Newsgroups: comp.sys.amiga.tech Subject: Enforcer Question Message-ID: <1990Dec19.025211.1258@urz.unibas.ch> Date: 19 Dec 90 01:52:11 GMT Organization: University of Basel, Switzerland Lines: 22