Re: Help Needed Diagnosing Possible Hardware Problem

Article View: comp.sys.amiga.tech

Article #7568

Back to comp.sys.amiga.tech Previous Next

#7568

From: David Le Blanc
Date: Wed, 19 Dec 1990 04:00

24 lines
1750 bytes

In article <paul.4842@wa1omm.UUCP>, paul@wa1omm.UUCP (Paul MacDonald) writes:
> 
> o  DigiView V4.0 smears quite a bit. This generally happens after
>    something has been digitized and I pull down a menu. Usually,
>    releasing the menu leaves a shadow of a menu selection on the screen.
I have a different problem. When using digiview (or dynashow for that
matter) and the machine is *TRYING* to display a dynamic picture,
be it Dyna-Ham, Dyna-Hires or ARES, the screen jitters violently from
left to right, at scan-line intervals.. the result is a horrific
mess, and yet cannot be duplicated on any other machine I have tried.

STATS : A500, Rev 5, normal (FAT) Agnus and denise.
	A590 (location zero patched.) with 2 Megs.
	NO-Butchers. My other machine WITH the rom switch and 
	boot switch butcherings works fine though...

>             | Usenet:      ...virgin!ubbs-nh!wa1omm!paul | 
Why such a HUGE .sig? sig = 1/<penis length> ???
Oops, sorry, forget I said that....
-- 
Email: david@dogmelb.dog@munnari.oz    |    Division of Geomechanics,
TEL.   (03) 881 1355                   |    CSIRO, P.O. Box 54
FAX    (03) 881 2052                   |    Mt Waverley 3149,
                                       |    AUSTRALIA.

Technical Details

Message-ID: <132@dogmelb.dog.oz.au>

Path:

arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!asgard!dogmelb!david

References: <paul.4842@wa1omm.UUCP>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!censor!geac!torsqnt!news-server.csri.toronto.edu!cs.utexas.edu!uunet!munnari.oz.au!asgard!dogmelb!david
From: david@dogmelb.dog.oz.au (David Le Blanc)
Newsgroups: comp.sys.amiga.tech
Subject: Re: Help Needed Diagnosing Possible Hardware Problem
Summary: digiview proglems. ARES (Dynamic HAM) Wont Work.
Message-ID: <132@dogmelb.dog.oz.au>
Date: 19 Dec 90 04:00:22 GMT
References: <paul.4842@wa1omm.UUCP>
Organization: CSIRO Division of Geomechanics Australia
Lines: 24

Reply to Parent Message