Article View: comp.sys.amiga.tech
Article #7632Re: Simple Overscan Display
From: Peter Kittel GERMANY
Date: Fri, 21 Dec 1990 09:22
Date: Fri, 21 Dec 1990 09:22
16 lines
1211 bytes
1211 bytes
In article <4189@mindlink.UUCP> a976@mindlink.UUCP (Ron Tarrant) writes:
>
>I took a look at the code for MultiPlot and unfortunately it doesn't do the
>kind of thing I'm trying to do. Like you said, it will create an overscan
>screen IF the WB screen is overscan (set by MoreRows, et al). What I want to do
>is create an overscan display from scratch so that the end product doesn't
>depend on MoreRows or something else to set up the overscan screen.
>
>Is there an OFFICIAL CBM way of doing this?
You must (upgrade to/wait for) 2.0 where there is an OFFICIAL way for
doing overscan.
--
Best regards, Dr. Peter Kittel // E-Mail to \\ Only my personal opinions...
Commodore Frankfurt, Germany \X/ {uunet|pyramid|rutgers}!cbmvax!cbmger!peterk
Technical Details
Message-ID:
<664@cbmger.UUCP>Path:
arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!cbmehq!cbmger!peterkReferences:
<4189@mindlink.UUCP>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!utzoo!attcan!utgpu!news-server.csri.toronto.edu!cs.utexas.edu!uunet!cbmvax!cbmehq!cbmger!peterk From: peterk@cbmger.UUCP (Peter Kittel GERMANY) Newsgroups: comp.sys.amiga.tech Subject: Re: Simple Overscan Display Message-ID: <664@cbmger.UUCP> Date: 21 Dec 90 09:22:10 GMT References: <4189@mindlink.UUCP> Reply-To: peterk@cbmger.UUCP (Peter Kittel GERMANY) Organization: Commodore Bueromaschinen GmbH, West Germany Lines: 16