uupc version 1.11.1 ?

Article View: comp.sys.amiga.tech

Article #9011

Back to comp.sys.amiga.tech Previous Next

#9011

From: Brian Moffet
Date: Wed, 01 Jun 1988 16:14

20 lines
1065 bytes

I have recompiled uupc just last night with the additions made a 
short while ago. This brought the version up to 1.11.1?
However, there were a couple of problems:

1) MAXERR was undefined. I set this to 10 (possibly needs to be higher?)

2) It will not talk to UUCP running on a SCO Xenix V r2 machine.
	I believe this is an older version of UUCP on the Xenix
	machine, but it is definately not HDB.    It gets to
	the point of Shere=1 and then exits without closing
	the serial port.

Any ideas out there?

thanks
-- 
Brian Moffet		brianm@sco.com  {uunet,decvax!microsof}!sco!brianm
The opinions expressed are not quite clear and have no relation to my employer.
'Evil Geniuses for a Better Tommorrow!'

Technical Details

Message-ID: <596@viscous>

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!bellcore!rutgers!cbmvax!uunet!sco!brianm

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!utzoo!utgpu!water!watmath!clyde!bellcore!rutgers!cbmvax!uunet!sco!brianm
From: brianm@sco.COM (Brian Moffet)
Newsgroups: comp.sys.amiga.tech
Subject: uupc version 1.11.1 ?
Keywords: doesn't talk to version 3 uucp
Message-ID: <596@viscous>
Date: 1 Jun 88 16:14:07 GMT
Organization: The Santa Cruz Operation, Inc.
Lines: 20